straube Posted June 20, 2014 Report Share Posted June 20, 2014 Where 1M-2N is LR+ usually 4+ trump and condensing heavily from IMPrecision and a local structure... 3C-7 loser or worse hand, may plan to GF.....3D-GF usually bal.....3M-LR.....3OM-unspecified void..........relay for high, mid, low.....3N-high stiff.....4C-mid stiff.....4D-low stiff3D-6 loser hand.....3H-unspecified void.....3S-bal or wants cue bid auction.....3N-high stiff.....4C-mid stiff.....4D-low stiff3H-unspecified void, 6 or fewer losers.....relay for void3S-5 losers or better, bal3N-5 losers or better, high stiff4C-5 losers or better, mid stiff4D-5 losers or better, low stiff After a 3S bid showing a balanced hand or hand that wants to cue bid 3N-by opener promises 2 of 3 top trump honors but by responder shows 1 of top 3 honors? Or how does the trump cue work exactly? Maybe it denies good trump. Quote Link to comment Share on other sites More sharing options...
foobar Posted June 20, 2014 Report Share Posted June 20, 2014 Where 1M-2N is LR+ usually 4+ trump and condensing heavily from IMPrecision and a local structure... 3C-7 loser or worse hand, may plan to GF.....3D-GF usually bal.....3M-LR.....3OM-unspecified void..........relay for high, mid, low.....3N-high stiff.....4C-mid stiff.....4D-low stiff3D-6 loser hand.....3H-unspecified void.....3S-bal or wants cue bid auction.....3N-high stiff.....4C-mid stiff.....4D-low stiff3H-unspecified void, 6 or fewer losers.....relay for void3S-5 losers or better, bal3N-5 losers or better, high stiff4C-5 losers or better, mid stiff4D-5 losers or better, low stiff After a 3S bid showing a balanced hand or hand that wants to cue bid 3N-by opener promises 2 of 3 top trump honors but by responder shows 1 of top 3 honors? Or how does the trump cue work exactly? Maybe it denies good trump. 3♥ as catering to the improbable void seems misplaced. Perhaps a better choice for 3♥ to show slam interest (likely implying a singleton given the 10-15 opening range). Also, given the (10)11-13 range for 1M, is it really possible to construct a 5-loser balanced hand? Quote Link to comment Share on other sites More sharing options...
ArtK78 Posted June 20, 2014 Report Share Posted June 20, 2014 3♥ as catering to the improbable void seems misplaced. Perhaps a better choice for 3♥ to show slam interest (likely implying a singleton given the 10-15 opening range). Also, given the (10)11-13 range for 1M, is it really possible to construct a 5-loser balanced hand?Where did you get the idea that opener's hand was limited to 10-15? Just because the structure was derived partly from IMPrecision doesn't mean that it is the system in use. Quote Link to comment Share on other sites More sharing options...
straube Posted June 20, 2014 Author Report Share Posted June 20, 2014 I should have specified, yes, 10-15 Quote Link to comment Share on other sites More sharing options...
straube Posted June 20, 2014 Author Report Share Posted June 20, 2014 3♥ as catering to the improbable void seems misplaced. Perhaps a better choice for 3♥ to show slam interest (likely implying a singleton given the 10-15 opening range). Also, given the (10)11-13 range for 1M, is it really possible to construct a 5-loser balanced hand? I was thinking of 5422s for 5-loser balanced hands. Something improbable such as AJTxx AKQx xx xx (I think I'd just open 1C with AKQxx AQxx xx xx). The real reason behind leaving a bid for the 5-loser balanced hand is just because I'd like to improve the symmetry. I actually reduced the void-showing bid from 3 strengths to 2 in order to facilitate this.For the most part, singletons (by either hand) are shown at 3N, 4C, and 4D and voids (by either hand) are shown at 3N, 4C, 4D. The one exception is 1H-2N, 3C-3D, 3S-3N, 4C/4D/4H. Quote Link to comment Share on other sites More sharing options...
steve2005 Posted June 20, 2014 Report Share Posted June 20, 2014 As your playing 2N as a limit (+) raise shouldn't there be some attempt to see if your hands fit for game, rather than just 1M-2N-3♣-3M and then going to game if your a max? over 1♥-2N you have 3♣/3♦/3♥. 3♣ could be min with a shortage, min with no shortage or GF hand and 3♦3♥ could be min with a shortage. so you can relay over 3♣ over 1♠ you could have 3♣/3♦/3♥ similar meanings and have 3♠ as a distributional GF Quote Link to comment Share on other sites More sharing options...
foobar Posted June 21, 2014 Report Share Posted June 21, 2014 Assuming that 1♥ - 2♠ isn't available for the raise, I would go with a simple adaptation of the IMP scheme. This isn't optimal over a 1♠ opening, but the mnemonic advantage is that it's identical over the 1♥/1♠ openings. 3♠ is always RKC, 3N - 4D by opener always shows some sort of shortness and it's the same for responder as well (except with slightly different semantics in one case). 1M - 2N: 3♣: Sub-par opening .....3♦: Counter try.....3♥: Direct sign off over 1♥, indirect sign off over 1♠.....3♠: RKC.....3N - 4D: Cues with slam interest 3♦: GF, but not interested in slam vs. LR.....3♥: No shortness, opener responds with 3♠= no shortness, else 3N-4D=High to low shortness.....3♠: RKC.....3N - 4D: High to low shortness.....4M: Sign off 3♥: Strong slam interest.....3♠: No shortness, opener responds with 3N-4D=High to low shortness.....3N - 4D: High to low shortness.....4M: Sign off (probably minimum 3-card LR).....4M+1: RKC 3♠: RKC 3N - 4♦: High - low voids with slam interest Quote Link to comment Share on other sites More sharing options...
awm Posted June 21, 2014 Report Share Posted June 21, 2014 It may be worth deciding what other raises you have available. The IMPrecision version often conceals a splinter because we don't play splinter raises (1♠-4♥ is to play; otherwise we play mostly fit double jumps). If you do play splinter raises in some form, it becomes much less important for responder to be able to show shortness (except maybe in the case of the limit raise opposite a very interested partner). In general I don't think a generic counter-try opposite a four-card limit raise is a very useful call. The limit raise is pretty limited anyway. You can get some benefit from more specific tries (basically we have mini-splinters, effectively), or from distinguishing responder's trump length if a three-card limit raise is possible (we have this situation also in some sequences). The "five loser balanced hand" is probably 6322 or 5422. In fact it might be useful in general to be able to specifically show the extra trump (which is powerful in some auctions). Having a way to bid keycard an still play 4M is interesting, but we have not found this to be a really useful method especially when opener is doing the asking. Usually the hands where slam opposite a limit raise is a possibility (but we didn't open strong club) are really shapely and while there are constructions like AQxxxx x KQJxx x, you will usually survive that hand by cuebidding and it's more common to be missing a side suit card (or have a void) where direct RKC won't do you much good. Quote Link to comment Share on other sites More sharing options...
straube Posted June 21, 2014 Author Report Share Posted June 21, 2014 It may be worth deciding what other raises you have available. The IMPrecision version often conceals a splinter because we don't play splinter raises (1♠-4♥ is to play; otherwise we play mostly fit double jumps). If you do play splinter raises in some form, it becomes much less important for responder to be able to show shortness (except maybe in the case of the limit raise opposite a very interested partner). In general I don't think a generic counter-try opposite a four-card limit raise is a very useful call. The limit raise is pretty limited anyway. You can get some benefit from more specific tries (basically we have mini-splinters, effectively), or from distinguishing responder's trump length if a three-card limit raise is possible (we have this situation also in some sequences). The "five loser balanced hand" is probably 6322 or 5422. In fact it might be useful in general to be able to specifically show the extra trump (which is powerful in some auctions). Having a way to bid keycard an still play 4M is interesting, but we have not found this to be a really useful method especially when opener is doing the asking. Usually the hands where slam opposite a limit raise is a possibility (but we didn't open strong club) are really shapely and while there are constructions like AQxxxx x KQJxx x, you will usually survive that hand by cuebidding and it's more common to be missing a side suit card (or have a void) where direct RKC won't do you much good. We basically have 2N and 3N, 4C, and 4D available for raises. So far our 3N, 4C, and 4D are fit showing bids same as yours and I rather like the idea of preparing for a contested auction. I also agree that having a counter-game try opposite a limit raise is not particularly useful...and we haven't the space to really make specific and useful counter tries anyway. Our limit raise can be 3 trump, but this is actually pretty rare and usually suit-oriented anyway. If you don't mind, what would you suggest for our 2N limit raise+ auctions? Some symmetry would be nice, but.... Quote Link to comment Share on other sites More sharing options...
awm Posted June 21, 2014 Report Share Posted June 21, 2014 What you have is okay. Maybe: 3C = not accept LR... 3D relay for shortage... 3M to play... 3OM rkc... 3nt-4D splinter 3D = accept LR... 3H relay for shortage... 3S rkc... 3nt-4D splinter 3H = strong with 6+M... 3S relay for shortage3S = strong two suited with clubs... 3nt asks shortage3nt = strong two suited with diams... 4C asks shortage4m = strong two suited with OM (shortage) Quote Link to comment Share on other sites More sharing options...
straube Posted June 21, 2014 Author Report Share Posted June 21, 2014 Thank you. I think your decision to opt for showing opener's second suit rather than a void mirrors what most are choosing for Jacoby 1M-2N, 4L rebids. It also got me thinking that if opener is really interested in this sort of information (for example he is balanced), he can just relay the hand, so maybe we should devote more machinery to showing responder's hand. For example... 1) singletons2) voids3) second suits missing important honors4) solid second suits missing controls If this is a good direction, then it would follow that 1M-2N, 3C would be semi-automatic in order to preserve space for responder to describe his hand. So 1M-2N, 3D might convey serious slam interest and 1M-2N, 3H+ might be devoted to something rare like voids. You know, "my information is more important than whatever you wanted to tell me". Since we're using FSJs of 3N, 4C, and 4D to 1M they might double as "second suits missing important honors" with the exception of 1H-4D specifically and opener could cue bid with a fitting honor in most instances. 1M-2N, 3C- 3D-a singleton3M-LR3OM-a void3N-asks control of clubs (say Axxxx x AKQxx xx)4C-asks control of diamonds4D-asks control of OM Quote Link to comment Share on other sites More sharing options...
foobar Posted June 22, 2014 Report Share Posted June 22, 2014 Here's another structure I have played: 1M - 2N: 3♣: GF, asks for shortness, responder bids No/High/Medium/Low with slam interest or signs off in game3♦: Counter invite, responder signs off or gives No/High/Medium/Low with slam interest 3M: Very poor hand, responder bids No/High/Medium/Low with slam interest3OM/3N/4♣/4♦: Void with slam interest If responder shows slam interest with no shortness over 3♣/3♦, opener responds with the same. Quote Link to comment Share on other sites More sharing options...
straube Posted June 22, 2014 Author Report Share Posted June 22, 2014 Before settling on a structure, we have to decide how we are going to handle responder's balanced GF hands. We have a relay bid of 2C available and Atul feels that we are going to get frequent interference and that it's best to jack the bidding to the 3-level immediately. So I'm interested in how others feel about this because if we can relay with the balanced hands then we've a lot more machinery we can devote (for 1M-2N) to responder's unbalanced hands. Quote Link to comment Share on other sites More sharing options...
Kungsgeten Posted June 22, 2014 Report Share Posted June 22, 2014 Here's another variant, developed by Mats Nilsland in Sweden: 1M-2NT;3C = extras3D = Min3H = extras, club side suit3S = extras, diamond side suit3NT = extras, side suit in other major4CDH = Side suit and two singletons Two singletons could be 6511 or 7411. After opener's 3C responder can relay for shortness, bid the major to deny slam interest, bid 3NT as a suggestion to play or a new suit as natural/spl (what you prefer). When relaying opener bids step one with no spl, step 2-4 with singleton and 5+ steps with void. When opener responds 3D responder can bid the major as a limit raise (NF), suggest 3NT or ask for SPL with 3oM. Quote Link to comment Share on other sites More sharing options...
rbforster Posted June 22, 2014 Report Share Posted June 22, 2014 Before settling on a structure, we have to decide how we are going to handle responder's balanced GF hands. We have a relay bid of 2C available and Atul feels that we are going to get frequent interference and that it's best to jack the bidding to the 3-level immediately. So I'm interested in how others feel about this because if we can relay with the balanced hands then we've a lot more machinery we can devote (for 1M-2N) to responder's unbalanced hands.If your 1M-2♣ GFR is made on all non fitting game forces, and maybe some fitting balanced GFs as well, the vast majority of the time it will be the non fitting variety. Honestly I think you'd have to be pretty crazy to want to come in as 4th hand with a preempt on that auction - you may screw up their relays but you're offering up a free option to saw you off doubled when they were just going to play 3N instead. Adding a few balanced fitting hands to the 2♣ bid shouldn't change advancer's decision process much. I think you're probably more likely to get interference over 1M-2N than 1M-2♣, since when you've got a big unbalanced major fit, they can throw in a lead directing 3X bid without much risk you'll forgo your 4M game to try for a penalty. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.