Jump to content

computer question


sharon j

Recommended Posts

Simple question(I think) I have a wired modem for my desktop computer's interet connection. This modem doesn't have wireless capabilites. I want to be able to use my laptop with wireless capabilites to connect to my Internet. Can anyone tell me if this can be done with a router? My modem has the following connections "line", "phone", "usb". Thanks in advance
Link to comment
Share on other sites

Simple question(I think) I have a wired modem for my desktop computer's interet connection. This modem doesn't have wireless capabilites. I want to be able to use my laptop with wireless capabilites to connect to my Internet. Can anyone tell me if this can be done with a router? My modem has the following connections "line", "phone", "usb". Thanks in advance

It sounds to me like you have a cable modem, correct? If so, you can get a wireless router or, in most cases, ask the cable company to set up a wireless router in your home for you.

 

The way it works is this: currently, the internet feed goes from your cable coax, to your modem, to your computer. With a router, it will go: cable --> modem --> router. Then you can plug in your desktop to the router with an ethernet cable while SIMULTANEOUSLY also connecting to the router via wireless, no cables involved.

Link to comment
Share on other sites

yea, I've had the dsl modem about 4 years. It does't have wireless. I may just upgrade the modem and not worry about getting router.

 

Thanks all. BTW, I imagine many teens can do many things I cannot do. lol :rolleyes:

Link to comment
Share on other sites

:P If your router has a built-in wireless capability, it will have a sticker on the outside with two lines:

 

SSID: (some name)

Wireless Network Key: (a string of numbers)

 

If it has that, then you can connect using wireless. Ask your computer to detect all wireless signals within range. If one of them is (some name), then click connect and when prompted for a password type in (a string of numbers). That should do it.

Link to comment
Share on other sites

oh wow. My modem does have an SSID name. I will try this later today. Thanks a bunch Tate!

No, I'm Tate. :-) Careful though --> what jdeegan was talking about was a ROUTER, not a modem. The modem translates signals from the cable into TCP/IP communication (basically, TCP/IP is the languages computers speak to each other over the internet). Routers then allow multiple computers to connect to that Internet connection.

 

You can't do wireless without that wireless router, unless your modem has built-in router capabilities.

 

Either way, your provider will be able to tell you what you have and whether you need a new installation of some sort.

Link to comment
Share on other sites

Nope. Configuring routers can be a pain but your DSL provider should have an option to install one for you. If you want to do it yourself, you can get them as cheap as $20, but if you're not computer savvy, I do suggest having someone else do it....
To expand on this:

 

Configuring routers so that you can access your wireless network is reasonably simple. Configuring the router so that the people outside your front door can't access your wireless network, and then all the computers on the network, wireless or not, is tricky.

 

As a result, "if you're not computer savvy, I do suggest having someone else do it..."

 

and then have them write down what is needed to add another device's "MAC Address" to the whitelist and what the encryption key/system is. If they can't do that - from just that description - they're not computer savvy enough (if they say "oh you wanted to run a whitelist? Okay..." and then go back in to set stuff up, that's okay, too). If they can, take that information to another of your "computer savvy" friends and have them look at it.

Link to comment
Share on other sites

My appologies to Jim and Tate for missing the change in poster.

 

I have since found out that my modem is a Actiontec M1000. There is a module upgrade (W1000) that will allow me to upgrade to wireless. This is what their website says about it:

 

"Add 802.11g wireless networking capabilities to your Qwest M1000 modem with this simple wireless plug-in module. All you have to do is plug the wireless module into the top of the M1000 DSL Modem. WPA (Wi-Fi Protected Access), WPA-PSK and Wired Equivalent Privacy (WEP) security features are all included for enhanced security.

•Compatible with Qwest M1000 DSL modems

•Provides your Qwest M1000 modem with 802.11g wireless connectivity

•Built-in WPA (Wi-Fi Protected Access), WPA-PSK and Wired Equivalent Privacy (WEP) security features for secure wireless connection

•Plug-and-play installation... no software or drivers required"

 

I also found an interest clip

http://computer.howstuffworks.com/router.htm

 

Even though these are router instuctions, would they not also apply to my modem after I have upgrade it?

 

Thanks everyone so much. You are really helping me out.

Link to comment
Share on other sites

Combination modem-routers are very common -- ISPs like to be able to provide their customers with a single device that does everything. Similarly, if your ISP provides voice service, they'll provide you with an EMTA, which is a combination modem and VOIP interface.
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...